Product Details:
Voltage: 24Vdc
Input signal: 4 to 20 mA
Voltage drop: 5.5 V
3. Loop burden: 275
4. Setpoint range: 4 to 20 mA
5. Hysteresis range: 0.1 mA, 1.0 mA
6. Output type: Form C contacts max. rating 1 A @ 125 VAC, 150 VDC Max
Switching Capacity:
30 W DC
60 VA AC
Mechanical Life: 108 switching cycles
Operating temperature range: -20 to +65°C (-4 to 149°F)
Temperature coefficient: <0.01%/K
Construction: Case body is green, high impact plastic.
Connections: 24 -14 AWG wire
Mounting: Standard DIN Top hat (T) profile rail according to EN50022
- 35 x 7.5 and 35 x 15.

Red Lion AIMR5306 loop powered setpoint alarm:
The Setpoint Module is a primary or redundant industrial process control alarm. The setpoint module features a loop powered threshold monitoring circuit with a bi-stable relay, LED indication of relay status, configurable hysteresis function and relay action. The threshold is set using a 20-turn potentiometer, while the configurable functions are set by moveable jumper settings.
The loop connections are made on the input side of the module through pluggable terminal blocks, terminals #1 and #2, featuring proven gas tight wire clamping technology. Inputs and outputs are physically separated to opposite sides of the module to ensure correct connection of the inputs and outputs. Relay connections are also made through pluggable terminal blocks. Hysteresis may be set to 0.1 mA or 1.0 mA, depending upon the application.
A 0.1 mA setting allows higher precision response for slowly varying signals, while the 1.0 mA setting is useful for applications where the signal has significant overshoot and undershoot (such as tank levels with unstable liquids). Relay function may be set in one of two modes: latching or non-latching. Latching mode engages the relay when the input signal crosses the setpoint threshold, and prevents the relay from releasing, when the signal drops below the setpoint threshold. A “RESET” button on the top of the module is used to
release the relay when the input signal is below the setpoint. Non-latching mode allows the relay to release when the signal drops below the setpoint threshold. A combination of through hole and surface mount technology provides stable, low drift performance, even in harsh industrial environments. Rhodiumplated contacts ensure low contact resistance even when low-level signals are switched, while levels up to 1 A and 125 VAC are also accommodated. The module’s environmental operating temperature range is -20°C to +65°C.
The modular high density packaging and mounting saves time and panel space. The modules snap onto standard 35 mm flat DIN rail.