Honeywell T675A1011 thermostat:
Remote bulb thermostats regulate temperature of air or liquids in ducts, pipes, tanks and boilers.
Suitable for applications requiring temperature control of air or liquids where controller must be placed outside the sensing area.
Typical uses include control of dampers and valves in heating, cooling and heating-cooling systems.
Fast response models (available for use in return air duct) operate approximately four times faster than standard models.
Controller can be mounted in any position.
Ambient temperature compensation provides good temperature control.
Refer to T775 Electronic Remote Temperature Controller where more exact control is required and/or remote controller location is preferred.
T675A models with fixed differential have an electrical rating of 125 VA at 120/208/240 and 277 Vac.
T675B models have 125 VA pilot duty up to 277 Vac.
T678 models have a maximum connected load of 2000 VA.
Application: Regulates temperature of air or liquids in ducts, pipes, tanks and boilers
Type: Remote bulb
Output: relay
Relay Outputs: T675A, B-1 SPDT; T678A-2 SPDT switch contacts
Voltage: 120 Vac or 240/277 Vac
Frequency: 50 Hz; 60 Hz
Approximate, Dimensions: 5 5/8 in. high x 2 in. wide x 2 5/8 in. deep
(143 mm high x 51 mm wide x 67 mm deep)
Sensor Inputs: 1
Approvals, Underwriters Laboratories Inc.: UL Listed
Approvals, CSA: Certile