Product Details:
Range: 30 to 150 mb
Mounting: 1/4 in NPT internal thread

Honeywell C6097A2310 pressure switch:
Application:-
The gas pressure switch C6097A is used to detect thepressure of city gas, natural gas, LP gas or air etc.When the gas pressure changes, the diaphragm of thepressure receiving part detects it and operates the (SPOT)switch to ON/OFF control of the external electrical circuit.
These switches are widely used to detect the upper limit or lower limit pressure of gas or air to be supplied to a gas burner, or to detect the clogging of the interlock filter of a burner blower.

Connection:
Inlet positive pressure Rp1/4" internal pipe thread (2 x)
Differential pressure Rp 1/8" internal pipe thread.
All connections according to ISO 7-1

Set point accuracy:
15% of the full scale (when pressure is increased)
NOTE: The knob readings are approximations of the actual settings.

Torsion and bending stress:
Pipe connections meet group 2, according to EN161requirements.

Contact ratings:
Resistive load: 250 Vac, 5A
Inductive load: 250 Vac, 3A (power factor 0.6)
Minimum contact current and voltage: 50 mA, 24 Vac

Material of pressure receiving parts:
NBR single diaphragm

Material of housing:
Aluminium die-cast

Material of case:
Polybutylene terephthalate

Material of cover:
Polycarbonate
Ambient temperature range:
-15 ... 60 C
Relative humidity: max. 90% at 40 C (non-condensing)

Sensed medium temperature range:
-15 ... 80 C

Electrical connection:
Plug connection according to PG11 or three pin plug
connector ("DIN plug")
Protection against electrical shock: class I

Wire connection terminals:
M3.5 screw terminals, including earth connection