Product Details: Voltage: 120Vac, 50/60Hz
Torque: 300 lb-in
Timing: 60-120 sec
Stroke: Adjustable 90-160°, preset at 90°
c/w 2 auxiliary switch

Honeywell M7294Q1007 modutrol motor:
The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed.
Integral spring return returns motor to normal position in the event of power failure on spring return model
Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position
Motor and circuitry operate from 24 Vac
Quick-connect terminals are standard screw terminal adapter is available
Adapter bracket for matching shaft height of older motors is available
Motors have field adjustable stroke (90 to 160 degrees)
Integral auxiliary switches are available factory mounted, or can be field added
Spring return motors can operate valve linkages from power end or auxiliary end shafts for normally closed or normally open valve applications
All models have dual shafts (slotted and tapped on both ends)
All models have auxiliary switch cams
Fixed torque throughout the entire voltage range
Motors are designed for either normally open or normally closed valves and dampers
Models available with adjustable start (zero) and span
Models available with 4 to 20 mA input signal
Die-cast aluminum housing

Features: Application: Electric
Frequency: 50 Hz; 60 Hz
Fail Safe Mode: Non-Spring Return
Auxiliary Switch Ratings: AFL - 120 Vac 7.2A; ALR - 120 Vac 43.2A; AFL - 240 Vac 3.6A; ALR - 240 Vac 21.6A
External Auxiliary Switches Available: Yes
Shaft Rotation (upon control signal increase): Clockwise (as viewed from power end) (normally closed)
Mounting: Foot-mounted
Feedback: No
Shaft Dimensions: 0.375 in. Square (10 mm Square)
Motor shafts: 2; Dual-ended shaft
Deadweight Load on Shaft: Either End 200 lbs.; Combined on both Shafts 300 lbs.
Approximate, Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in.
deep (164 mm high x 140 mm wide x 185 mm deep)
Ambient Temperature Range: -40°F to +150°F (-40°C to +60°C)
Approvals, Underwriters Laboratories Inc.: Listed: File No. E4436, Guide No. XAPX for USA and Canada
Approvals, CE: EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
Approvals, RoHS: 2011/65/ES
Accessories:
220736A/U Internal Auxiliary Switch Assembly - 1 Switch
220736B/U Internal Auxiliary Switch Assembly - 2 Switches
220738A/U Adapter Bracket. Adjusts shaft height to match Modutrol III motors
220741A2-72/U Screw Terminal Adapter Kit for Series 72 Modutrol IV Series 2 motors - Converts quick-connect terminals to screw terminals
221455A/U Infinitely adjustable Motor Crank Arm
4074ERU/U Weatherproofing kit. Protects motor from driving rain when mounted in any position. Not needed if motor is mounted upright.
50017460-001/U 24/120/230 Vac Internal Transformers for Series 2 Motors
50017460-003/U 120 Vac Internal Transformers for Series 2 Motors