Product Details:
Voltage: 24Vac, 50/60Hz
Torque: 300 lb-in
Timing: 120-240 sec
Stroke: Adjustable 90-160°, preset at 160°

Honeywell M6284D1008 modutrol motor:
These Series 62 Modutrol IV Motors non-spring return floating
control motors are used with controllers that provide a switched
SPDT or floating output to operate dampers or valves. These
motors also have an internal electrically isolated feedback
potentiometer that provides indication of the motor shaft position.
Some models can be used for slaving Series 90 Motors

Features: Application: Electric
Control Signal: Floating
Frequency: 50 Hz; 60 Hz
Fail Safe Mode: Non-Spring Return
Auxiliary Switch Ratings: AFL - 120 Vac 7.2A; ALR - 120 Vac
43.2A; AFL - 240 Vac 3.6A; ALR - 240 Vac 21.6A
Shaft Rotation (upon control signal increase): Dependent on wiring
(normally closed)
External Auxiliary Switches Available: Yes
Mounting: Foot-mounted
Power Consumption: Driving 15 VA
Feedback: Yes
Shaft Dimensions: 0.375 in. Square (10 mm Square)
Motor Shafts: 2; Dual-ended shaft
Deadweight Load on Shaft: Either End 200 lbs.; Combined on both Shafts 300 lbs.
Approximate, Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in.
deep (164 mm high x 140 mm wide x 185 mm deep)
Ambient Temperature Range: -40°F to +150°F (-40°C to +60°C)
Approvals, Underwriters Laboratories Inc.: Listed: File No. E4436,
Guide No. XAPX for USA and Canada
Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position
Motor and circuitry operate from 24 Vac
Quick-connect terminals are standard screw terminal adapter is available
Adapter bracket for matching shaft height of older motors is available
Motors have field adjustable stroke (90 to 160 degrees)
Integral auxiliary switches are available factory mounted, or can be field added
All models have dual shafts (slotted and tapped on both ends)
All models have auxiliary switch cams
Fixed torque throughout the entire voltage range
Motors are designed for either normally open or normally closed valves and dampers
Include electrically isolated feedback potentiometer that provides shaft position indication
-S models with non-linear feedback are for slaving applications only
Approvals, CE: EN55011 (Emission) EN50082-2 (Immunity)
73/23/EEC (LVD)
Approvals, RoHS: 2011/65/ES
Comments: non-linear feedback, for slaving applications only
Accessories:
220736A/U Internal Auxiliary Switch Assembly - 1 Switch
220736B/U Internal Auxiliary Switch Assembly - 2 Switches
220738A/U Adapter Bracket. Adjusts shaft height to match Modutrol III motors
220741A2-62/U Screw Terminal Adapter Kit for Series 62 Modutrol
IV Series 2 motors - Converts quick-connect terminals to screw terminals
221455A/U Infinitely adjustable Motor Crank Arm
4074ERU/U Weatherproofing kit. Protects motor from driving rain
when mounted in any position. Not needed if motor is mounted upright.
50017460-001/U 24/120/230 Vac Internal Transformers for Series 2 Motors
50017460-003/U 120 Vac Internal Transformers for Series 2 Motors